From front-of-house mix and monitor engineering to wireless microphone systems, intercom, PA deployment, and location sound. LML staffs individual audio positions or a full audio crew depending on scale and complexity.
Owns the complete audio signal chain: PA design, gain structure, I/O patch, and the front-of-house mix.
View role →Supports the A1: mic placement and handoffs, cable runs, wireless pack distribution, and backstage audio needs.
View role →Wireless coordination and intercom: spectrum planning, frequency management, and the intercom architecture for all departments.
View role →Operates the FOH console on productions where mix is a dedicated seat, balancing inputs and riding faders through the full run.
View role →Dedicated stage monitor console, managing personal mixes, IEM feeds, and wedge levels for all talent and performers.
View role →Speaker system deployment: flying arrays, ground-stacking, delay hangs, amplifier networking, and system EQ coordination.
View role →Field audio capture for post: ENG-style recording, field interviews, b-roll audio, and boom/lav packages for editorial.
View role →Works under the A1 and A2: cable runs, patching, equipment staging, and infrastructure support through the full run of show.
View role →Intelligibility is not loudness. The Speech Transmission Index (STI) measures how much of the rhythm of speech, the fast rise and fall of syllables, reaches a listener's ear intact. Two things erode it: noise that fills in the quiet gaps between syllables, and reverberation that smears one syllable into the next. A low-noise signal chain fights the first. A compact, pattern-controlled system fights the second. Set up a room below and watch what each one buys you.
Syllables cycle at roughly 2 to 5 Hz. The higher the curve stays through that band, the clearer the words.
| Modulation rate | This design | Conventional |
|---|
Consonants carry most of the meaning in English, and they are the quietest part of speech: 20 to 30 dB below the vowels, concentrated between 2 and 4 kHz. Any noise floor climbs into that band before it touches anything else. Part of that floor is the room. The rest is the system: hiss from stacked gain stages, hum from long analog copper, buzz from ground loops between racks. All of it lands directly on the softest, most important sounds.
An LML chain keeps the system's own contribution well below the room. Dante replaces the analog snake, digital wireless like Shure Axient Digital and ULX-D replaces noisy analog RF, and gain is set once, deliberately, from the capsule to the amplifier.
Where it pays off: a loud ballroom sets its own floor, so the gain there is small. In a quiet boardroom, and on every webcast, record, or press feed where there is no room noise to hide behind, the system floor is the floor. Try the boardroom preset and switch the low-noise chain off.
Compact design starts with the signal path. Every analog stage between microphone and loudspeaker adds its own noise and its own chance of a fault, and noise only ever sums. Converting once at the stage box and staying digital through console, DSP, and amplifier cuts the chain to a handful of stages. Fewer boxes also means fewer power supplies, fewer ground references, and a smaller footprint at front of house.
In conferencing rooms the same idea moves the microphone. A Shure MXA920 ceiling array steers a pickup lobe to within a few feet of each talker, so the voice is captured well above the room before it reaches the P300 processor.
The other half of compact design is the loudspeaker. A conventional point-source box radiates widely, so much of its energy hits the ceiling and walls and comes back late as reverberation that smears syllables together. Compact column and steered line arrays such as L-Acoustics Syva, d&b xS, and JBL CBT keep the vertical pattern narrow and aimed at listeners.
Raising the direct-to-reverberant ratio by 6 dB does more for intelligibility in a live ballroom than adding 6 dB of level, because the late energy was the problem. Toggle the compact PA above with RT60 at 1.6 s and watch the gap.
Words are guessed from context. Announcements fail.
Listeners strain and fatigue quickly. Names and numbers get lost.
Familiar material is followed. Unfamiliar terms need repeating.
Comfortable listening for a full session. The target for corporate rooms.
Near face-to-face clarity. Broadcast and recording grade.
Model notes: STI is computed with the Houtgast and Steeneken modulation transfer method across the fourteen standard modulation rates from 0.63 to 12.5 Hz, with a single-band noise term and an exponential reverberant tail plus direct field. A conventional chain is modeled as adding 42 dBA of system noise at the seat and 0 dB direct-to-reverberant ratio; the low-noise chain is 26 dBA and the compact PA adds 6 dB of direct-to-reverberant ratio. Rating bands follow IEC 60268-16. Real rooms vary by frequency, seat, and occupancy; LML measures on site.
Tell us your show date, positions, and venue. We'll staff it.
Submit a Booking Inquiry