Video Crew Positions

Department Lead

Engineer in Charge

Accountable for the integrity of the entire video output: signal flow, team direction, and primary client liaison.

View role →
Video Engineer

Video Engineer (V1)

The EIC's primary operational partner. Owns a dedicated seat and holds technical execution when the EIC is managing the room.

View role →
Operator

Video Operator

Fills a defined seat (graphics station, playback machine, record position, or confidence monitoring) under EIC/V1 direction.

View role →
Playback

Playback Operator

Manages the pre-recorded content stack (packages, b-roll, animations) executing starts and stops on cue with the show caller.

View role →
Graphics

Graphics Operator

Client-facing presentation fluency, advancing decks, executing last-minute swaps, and troubleshooting without breaking composure.

View role →
Switching

High-Res Switch Operator

Runs the production switcher at 4K/UHD: clean transitions across main screen, confidence, IMAG, and broadcast simultaneously.

View role →
Switching

Camera Switch Operator

Selects and cuts between live camera sources at the video director's call, a dedicated seat on broadcast and IMAG-heavy shows.

View role →
Projection

Projectionist

Setup, alignment, and operation of projection systems: single units, stacked for brightness, or multi-projector blended arrays.

View role →
Record

Record Operator

Captures the show to file (ISO program output, individual camera feeds, or both) and confirms file integrity at each act break.

View role →
Camera

Camera Operator

Owns framing, focus, and exposure at their position, delivering a consistent, on-spec picture to the switcher throughout the run.

View role →
Camera

Robocam Operator

Controls PTZ heads in real time, one op managing multiple angles from truss-mounted or inaccessible positions.

View role →
Camera

Shader / Painter Operator

Manages camera shading from a remote control panel, matching iris, exposure, white balance, and color across all positions.

View role →
Camera

Steadicam Operator

Operates a Steadicam rig for smooth, stabilized movement, following talent and executing tracking shots no locked camera can achieve.

View role →
Camera

ENG Operator

The roaming camera position: handheld, untethered, capturing b-roll, audience reactions, and cutaways during the live show.

View role →

Every Box Is a Frame.
The Audience Counts Them.

Nobody in a ballroom knows what a frame sync is. They know when the presenter's mouth and voice drift apart, and they know when the person on the screen waves a beat after the person on stage. Both come from the same place: the time it takes a picture to travel from the camera lens to the display, measured in frames, with every device in the path adding its own. A short, genlocked, format-matched chain keeps that number small. Audio delayed to match keeps sync honest for whatever remains. Build a path below and see what the room sees.

The Signal Path
A frame of delay is twice as long at 29.97 as at 59.94. The house format sets the price of every box in the path.
Scalers, frame syncs, and format converters between sources and the screen. A laptop scaled to the house format is one pass; an unlocked camera through a frame sync is another.
LED processor and panels together run about a frame and a half. Projectors add internal processing and typically run two to three unless set to a low-latency mode.
LML Design Choices
What the Room Sees
0
Tight
Milliseconds, lens to screen
0 frames at 59.94
0 ms
Audio leads video by
Locked
Lip sync
16.7 ms
Per frame
5
Devices in path

Where the frames go, stage by stage

Milliseconds added by each device at the selected frame rate. Hover a bar for both values.

This design Conventional, same settings
Latency added by each stage of the video path for this design and a conventional path
View as table
StageThis designConventional
01 / Frames

Every box is a frame

A camera needs most of a frame to read its sensor and build a picture. A production switcher holds a frame to cut cleanly. A scaler holds one or two to resize. A presentation switcher, an LED processor, a projector: each takes its share. None of them is slow on its own. Together they are the delay the audience sees between the person on stage and the person on the wall.

Frames are the unit, but milliseconds are what people perceive. At 59.94 a frame is 16.7 ms; at 29.97 it is 33.4. The same chain of boxes is twice as late in a 29.97 room, which is why the house format is the first decision the Engineer in Charge makes, not the last.

02 / Sync

Lip sync is the first complaint

Audio through a console arrives in a few milliseconds. Video through the chain above arrives a hundred or more later, so without correction the voice leads the lips. Viewers detect audio leading by about 45 ms and object past 90. That is three to five frames at 59.94: an ordinary IMAG path, uncorrected, is already past the line.

The fix is in the audio department. The A1 measures the video path and delays program audio to match, for the house feed and separately for the webcast, whose encoder adds more. What the delay cannot fix is the picture itself: a late screen still lags a live presenter's gestures, which is why the path has to be short first and synced second.

03 / Compact chain

Genlock it, match it, shorten it

Compact design in video means fewer conversions. One house format, every source conformed to it at the source, and every device locked to house reference. A locked frame sync passes video straight through instead of buffering a frame to re-time it. A scaler that never changes format can run in its low-latency mode. The presentation switcher cuts without waiting for sources to line up.

In practice: keep the IMAG path to camera, switcher, processor, wall. Scale laptops before the switcher, not after it. Put the projector in its low-latency mode and confirm it with a clapper at tech. Platforms like Ross Ultrix and Analog Way Aquilon exist to do routing, sync, and scaling in one locked frame rather than a stack of boxes.

< 70 ms
Tight

About four frames at 59.94. The wall feels live.

70 to 100 ms
Acceptable

Visible if you look for it on big gestures. Audio must be delayed.

100 to 150 ms
Noticeable

The screen clearly trails the stage. Common with unlocked chains.

150 to 200 ms
Distracting

Applause lands twice. Presenters start watching the wall.

> 200 ms
Broken

Six or more frames at 29.97. Rebuild the path.

Model notes: stage latencies are typical figures in frames. Camera and camera control unit 1.0; production switcher 1.0; each conversion pass 1.5 unlocked or 0.5 genlocked; presentation switcher 1.5 unlocked or 1.0 genlocked; LED processor and panels 1.5; projector 2.5. Milliseconds are frames times the frame period at the selected rate. Lip-sync thresholds follow ITU-R BT.1359: audio leading video is detectable past 45 ms and objectionable past 90 ms. Webcast encoding and distribution add seconds on top of all of this, equally to audio and video, and are not shown. Actual figures vary by model and firmware; LML measures the real path at tech.

Need a video crew?

Tell us your show date, positions, and venue. We'll staff it.

Submit a Booking Inquiry